SRT 45 PUNISHER:

Beginning life as a Armscor 1911A2, this double stack , high capacity 45 acp has undergone quite a transformation from its humble beginnings!

What started as a simple add on of custom grips, has turned into a rock solid, EXTREMELY accurate high capacity 45acp that everyone immediately falls for!  The PUNISHER named for the Movie, "The Punisher" is a tribute to the guns the main character used in the movies, except this one is a 14+ rounds in the magazines weapon!

Very few parts of the gun are Armscor anymore!  

The slide and frame are custom machined with "ribs" mimicking that of a skeleton's rib cage.  

The slide is HAND FIT to the frame and has no distinguishable movement up or down, left or right......it's stupid tight!  

Check out the specs below for more detail!


  • ARMSCOR 1911A2 Frame, barrel and Sights
  • CASPIAN Slide, custom machined, hand fit to frame
  • WILSON combat components: All hand fit and tuned!
  • Beaver tail
  • Sear
  • Disconnector
  • Guide Rod
  • All Springs
  • Extractor
  • Firing pin
  • Hammer
  • STI Match Grade trigger
  • 3 port compensator / with standard Wilson Bushing
  • 3: 14 round magazines ( 1 Armscor, 2 MECGAR )
  • Collectors edition Custom PUNISHER logo Alumnium grips
  • Custom Ceracoat Gloss Black

SRT Custom Handguns

​SRT G17 GEN 5 MOS


Glock perfection is a very good statement.

The recent version, the Gen 5's are probably the most perfect Glocks to date.

However, it is possible to improve on perfection!

I believe that the Glock MOS pistols are the best platform to have when using a RMR or similar red dot on. But if you want a custom machined slide to complete your pistol, in my opinion the ZEV Tech slides are easily some of the best slides available for the Gen 5's


This pistol is a work in progress, but what a hell of a great start!

Subtle grip mods and trigger guard mods are the just the beginning for this beast, more mods are planned for the future!


Internal components are modded and smoothed out even more, yes the trigger is better now!

Add on a Trijicon RMR and Suppressor Night Sights to get the party going, for now...........I'm sure a suppressor is coming soon!!!

The addition of the Surefire X300 makes the beast even more combat  / home defense ready!

SRT G19 Carry

SRT G34 WICK

SRT CUSTOM PISTOLS

Glock G34 Gen 3: aka SRT G34 WICK

This beauty started off life as a better than most standard Glock handguns.  All we did at SRT was enhance a "better" handgun and turned it into a "Great" handgun.  Influenced by the recent John Wick 2 Movie handgun used by Keanu Reeves. 

SRT took the concept of the TARAN TACTICAL INC gun, improved on their ideas and added a few addition fetatures that shooters would appreciate! All while keeping unnecessary cost way down and substantial wait time to get a TTI handgun!


Improvements and modifications made:

  • AMERIGLO I-Dot PRO Night sights
  • GS Full length TUNGSTEN Guide rod
  • GS Extended precision slide lock (steel!)
  • GS Polymer magwell installed
  • APEX trigger
  • GHOST disconnector and springs
  • GLOCK extended controls: Mag release, Slide release
  • SRT Competition / Combat grip mods ( read above!)
  • Trigger bar and action completely polished, tuned to 3.5 lb pull
  • 2 magazines: 1 17 round capacity and 1 22 round ZEV tech 5 round extension added

SRT 1911A1 PUNISHER

SRT 1911A1 PUNISHER:

This  Armscor 1911A1 single stack , standard capacity 45 acp has undergone quite a transformation!


The SRT Punisher 45 I built for my son has been the topic of conversation with many of my clients!


A very good friend of mine, Mike B called me one day and said, "I'm ready for a 1911, something that was similar to what was used in WW2."

Of course I began asking what all he wanted and he was very open to suggestions. He referred to the  SRT Punisher many times in the conversation. He said he'd love to have that one but it was a bit too much due to the size of the grip and weight! It is a heavy beast!

I said "well how about a Punisher very similar to the movie gun?"  Mike got excited and we started talking about the movie gun and what all it was and had done to it.

What you see is what Mike wanted in a Punisher!

It is a parkerized frame and slide with all Stainless Steel WILSON combat components, all of which are completely handfit.


The slide is completely HAND FIT to the frame and has absolutely no movement up or down, left or right......but smooth as butter action!  


Check out the specs below for more detail!

ARMSCOR 1911A1 Frame, barrel and Novak Sights
WILSON combat components: All hand fit and tuned!

  • Beavertail grip safety
  • Ambi Thumb Safety
  • Flat mainspring housing with removable mag well
  • Extended slide release
  • Sear
  • Disconnector
  • Full length Guide Rod
  • All WILSON Springs
  • Extractor
  • Firing pin
  • Hammer
  • Match Grade trigger
  • Torx grip screws


Custom G3 Punisher grips

Custom 3 port comp


​​​ STRATEGIC RESPONSE TACTICAL  LLC​

 

SRT G17 GEN 5 MOS.

Here's a rare opportunity to see a few completely customized handguns up close!

These are not just pretty to look at but fully functioning, accurate and completely dependable handguns!  

Many of which have been for tested by.........well let's just say that information is well above your pay grade!  

Anyway, some serious operators have put some rounds through them and LOVE them!

​SRT 45 PUNISHER

Glock G19 Carry
This beautiful Gen 3 G19 started off life as a well respected and desired GLOCK handgun!  Once again all we did at SRT was enhance a "better" handgun and turned it into a "Great" handgun.  Carrying over the same Influence by the recent John Wick 2 Movie handgun used by Keanu Reeves, the SRT G19 Carry is a very potent concealable package! 

Improvements and modifications made:

HI VIZ Fiber Optic Front sight and Glock Rear Night sights
GS TUNGSTEN Guide rod
GS Extended precision slide lock (steel!)
GLOCK trigger (highly modified!)
GHOST disconnector and springs
GLOCK extended controls: Mag release, Slide release

MAGPUL G19 Mag well 
SRT Competition / Combat grip mods ( read above!)
Trigger bar and action completely polished, tuned to 3.5 lb pull
Magazines: 3 - 15 round, 1- 17 round

SRT Custom Hand guns are available as brand new and completed custom weapon or as modifications to your existing handgun. Based primarily on GLOCK handguns the options are virtually endless for a new or existing handgun.  


SRT Carry Grip Mod: 

This is designed for the CCW crowd, the SRT Glock Carry Grip Job provides maximum grip and traction when shooting without sacrificing comfort when concealed. The main contact points between your hand and pistol, the front and rear straps, are expertly shaped and textured while the sides remain smooth and nonabrasive. Comfort is no longer sacrificed for the recoil control needed for fast follow-up shots. The surface texture is created from the Glock's own frame material, eliminating the overly abrasive feeling of adhesive sand paper.

- Rear strap size reduction for improved aim angle.
- Reshaping of finger grove area for a more natural feel and improved grip.
- Undercut trigger guard for a higher hand position elimination of forced spacing between index and middle finger.
- Textured trigger guard for weak hand index finger
- Textured pad for weak hand thumb.
- Inset around mag release for increased ease of magazine ejection.


SRT Competition / Combat Grip Mod: 

This state of the art grip job is designed for Competition Shooting and Tactical communities as well as for Law Enforcement and Military personnel. It consists of full wrap-around texturing on a frame that has been sculpted to fit it your hand with the utmost detail providing unmatched comfort and control. The surface texture is created from the Glock's own frame material, eliminating the overly abrasive feeling of adhesive sand paper. 


- Rear strap size reduction for improved aim angle.
- Reshaping of finger grove area for a more natural feel and improved grip.
- Undercut trigger guard for a higher hand position.
- Textured trigger guard for weak hand index finger.
- Textured pad for weak hand thumb.


Modifications and options available:


Different sight options: 

- Ameriglo or Trijicon Night sights.

- Tritium or Fiber Optic sights


Trigger work: Stock GLOCK trigger
Professionally tuned and polished and by using custom springs and custom connectors for total reliability.

Our trigger jobs average a nice, smooth, clean, and crisp 3 – 3.5 pound pull.

Aftermarket Replacement Trigger:

Trigger replacement with high end aftermarket units.

- APEX Tactical, ZEV Technologies, Pyramid Trigger systems

- Partial or complete action enhancement

- Custom springs and disconnectors


Full length Guide Rods (Model Specific)

- Stainless Steel or TUNGSTEN

- Captured springs (Model Specific)

- Custom Spring rates