NIGHTFORCE: ATACR 1- 8X24 F1    $2800.00

​MK12

The evolution of the SPR comes home to Daniel Defense in the MK12.  Born of necessity, raised in the Army’s Marksmanship Unit and refined to Daniel Defense Mil-Spec+ standards, it is now available.  


The MK12 is constructed around an 18-inch Stainless Steel barrel with a chamber created during the Cold Hammer Forging process, which ensures the most precise alignment of the chamber to the bore possible.  This, along with being DLC finished, equates to unprecedented accuracy and durability.  The MK12 barrel is engineered with a rifle-length direct impingement gas system and utilizes the MK12 gas block, which is built to Crane Specifications for USSOCOM.  The MK12 gas block is precision CNC machined from 416 stainless steel and Black Oxide Coated.  The rifle is fed with a M16 profile bolt carrier group and uses a BCMGUNFIGHTER Charging Handle for ease of operation.  The upper receiver is equipped with a free floating DDM4 Rail 12.0 quad rail for allowing your choice of optics and accessories and is finished off with a Daniel Defense Improved Flash Suppressor.  


The MK12 was designed from the ground up to be a precision rifle, therefore it required certain refinements.  We equipped it with the Geissele SSA 2-Stage Trigger to give the marksman an advantage delivering precise fire to the target.  We also furnished the MK12 with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

MATERIALS & CONSTRUCTION

LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum,   Type III Hard Coat Anodized
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
BARREL: Proprietary Blend of Stainless Steel, Cold Hammer Forged, 1:7” Twist, 18″ MK12 Profile, DLC Finished, and HP/MPI tested
GAS SYSTEM: MK12 Low Profile Gas Block CNC Machined of hardened 416 stainless steel with Black Oxide Coating, Rifle-Length, Direct Impingement
MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
BUFFER: H Buffer
SIGHTS: Sold Separately
HANDGUARD: Daniel Defense DDM4 Rail 12.0, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
Made in the USA!


The DS-SR07-D-IT is a waterproof switch assembly for simultaneous use of SureFire Scout Light® Weapon Lights and an ATPIAL or DBAL laser. It includes a system-disable feature, a click-on/off pushbutton switch, and a plug-in SR07-D-IT dual-control switch assembly with a 7” momentary-on and a dome-style on/off remote tape switch. The integrated pushbutton and remote switch assemblies operate independently, providing switch redundancy. 
FITS: Scout Light Weapon Lights and an ATPIAL or DBAL laser
Features

DS00 click-on/off pushbutton switch
SR07-D-IT provides remote momentary-on activation, either separately or simultaneously, for two weapon-mounted illumination tools—a SureFire WeaponLight and an ATPIAL or DBAL laser. Separate plug-in cables connect each device to the switch platform, where two pressure-pad switches are integrated with a single snap-on clamp for easy attachment to your firearm's Picatinny rail forend
System-disable feature
Two piece, O-ring sealed housing swivels to facilitate precise positioning of the integrated click on/off switch in the DS switch housing.
.

The ATACR™ 1-8x24 riflescope is designed and built to be the ultimate low-power variable riflescope. It includes pristine ED glass, bright daylight illumination, an intelligent reticle, very low-profile adjustments and bomb-proof reliability, with a field of view at 1x equivalent to open sights…but vastly more precise. It measures just over 10 inches in length and weighs 21 ounces, with a streamlined profile. The daylight visible, center red dot allows for rapid engagements like a red-dot sight. Unlike a red-dot, however, the 1-8x provides up to 8x zoom to help locate, identify and engage targets at the maximum effective range of most rifles. The intelligent FC-DM first focal plane reticle provides precise hold and hold-off points. The low-profile turrets are capped to prevent accidental adjustment and offer true .1 Mil-Radian adjustment. To aid in fast magnification adjustments, an integrated Power Throw Lever (PTL) is included. 

The Advanced Target Pointer/Illuminator/Aiming Laser (ATPIAL) is small, lightweight and easy to use. The aiming system has integrated infrared and visible aiming lasers and an infrared illuminator.  The ATPIAL (AN/PEQ-15) has been battle-tested for use on small arms and crew-served weapons.  This device is the U.S. Armed Forces standard for night direct-fire aiming and illumination.Some models are restricted for use by law enforcement and military organizations. Contact EOTech at 888-368-4656 or email for more information.The ATP-000-A18Vis is a visible only model that was created to support tactical training requirements for law enforcement and military organizations.

$1209.00 (for the pair)

ATPIAL (AN/PEQ-15) - Adv Target Pointer/ Illum/ Aiming Laser:    $1439.00  

Many have asked about this for some time, so for 2019 I am now offering what I will call "TIER 1 OPERATOR" weapons systems!! Previously "kits" utilized either Colt M4 or FN M4 platforms because that was what was available. As time progressed and changes in leadership realized the Tier 1 guys needed upgraded and newer equipment. Knights Armament and Daniel Defense stepped up as well as many other manufacturers to meet the requests of our elite warriors. 


Below are the Same EXACT WEAPONS and gear that our Tier 1 guys are using currently throughout the world theater.  Keep in mind the weapon systems "kits" do change according to mission specific needs.

 

If you absolutely want what our guys are using....here it is! 

Prices are MSRP, and as always I will work with you on the costs.

Rifles do not come with sights, they will need to be purchased separately.


NO weapons represented here are "Select fire", meaning full auto!  The MK18 listed below is a AR Pistol, not a SBR and will not require a tax stamp.

T​TIER 1 OPERATOR

​tier 1 operator: Designated marksman​/ SPR setup

​DS-SR07-D-IT: Waterproof Switch Assembly      $229.00

Product Details: EXPS3 
Night vision compatible
Length/Width/Height: 3.8” x 2.3” x 2.9” (96.5 x 58.4 x 73.7 mm)
Weight: 11.2 oz (317.5 g)
Water Resistant: Submersible to 33 ft. (10 m) depth
Mount: 1” Weaver or MIL-STD-1913 rail
Brightness: 20 daylight settings / 10 additional settings for Gen I through III+ night vision devices
Power Source: One 123 lithium battery  
Battery Life: 600 continuous hours at nominal setting 12 at room temp.

$2162.00 MSRP

*SRT NOTES*


For example if you, the client wants the same exact set up as a SF guy going on mission, your typical rifle setup would be this:

- Daniel Defense M4A1 Rifle:               $2140.00

- EOTECH EXPS3 & G33:                   $1209.00

- ATIPALl ANPEQ 15:                          $1439.00

​- Surefire M300C & DS-sro7 switch:     $  530.00

- Magpul BUIS Fr / Rear:                     $    90.00

- Magpul 30rd mags (x4):                    $     75.00 

                                                Grand total:      $ 5483.00



Keep in mind the typical operator will want different grips, butt stock, sling, angled fore grip, fore grip, etc....adding cost to the weapon system, but more individual preference and setup!

​Product Details

Length/Width/Height: 4.6” x 2.8” x 1.6” (117 mm x 71 mm x 41 m)
Weight: 7.5 oz with batteries
Battery Power: One 3-volt DL123 battery

Visible Aim Laser - ATPIAL
Output: 4.0 mW (Class IIIa) / Beam Divergence: 0.5 mrad / Wavelength: 605-665 nm
Range: > 25 m

IR Aiming Laser - ATPIAL
Output Power Low: 0.6 mW (Class I) / Output Power High: 25 mW (Class IIIb)
Beam Divergence: 0.5 mrad
Wavelength: 820-850 nm
Range: > 600 m (Low), 2000 m (High)

IR Illuminator - ATPIAL
Output Power Low: 3.5 mW (Class IIIa)
Output Power High: 30 mW (Class IIIb)
Beam Divergence: 1-105 mrad (minimum)
Wavelength: 820-850 nm
Range: > 2,000 m

Danger: Laser Radiation Avoid direct exposure to beam


IR Laser: Power: 50 mW / Wavelength: 830 nm  Class IIIb

VIS Laser:  Power: < 5 mW / Wavelength: 650 nm Class IIIa

Specifications
Max Output -- White Light 500 lumens
Runtime* 1 Hour*
Length 4 .10 inches
Bezel Diameter 1 .125 inches
Weight w/Batteries 4 .1 ounces
Batteries 1 123A  (included)*All performance claims tested to ANSI/NEMA FL1-2009 Standard.

​Product Details: EOTECH G33 sts
Compatible with all EOTech Holographic Weapon Sights
Length/Width/Height: 3.9” x 2.2” x 3.3” (99 x 55.9 x 83.9 mm)
Weight: 11.2 oz (317.5 g)
Water Resistant: Submersible to 33 ft (10 m) depth
Mount: MIL-STD-1913 rail / 1" Weaver
Fixed Magnification: 3X
Eye Relief: 2.2” (55.8 mm)
Field of View: 7.3°
Sealing: Fog resistant internal optics

M4A1 (MIL SPEC +®)

The Daniel Defense M4A1 features the M4A1 RIS II, which has been in use by US Special Operations Command (SOCOM) for the SOPMOD II Weapons System since 2005.  The M4A1 features a 14.5” Cold Hammer Forged M4 Profile barrel with a permanently attached Daniel Defense Flash Suppressor.  The M4A1 is one of many configurations that is finished with our Mil Spec + Cerakote.  This rifle also comes with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

MATERIALS & CONSTRUCTION

LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 14.5″ M4 Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
MUZZLE DEVICE:
Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finish
BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
BUFFER: H Buffer
SIGHTS: Sold Separately
HANDGUARD: Daniel Defense M4A1 Rail Interface System (RIS) II, CNC Machined of 6061-T6 Aluminum
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
FINISH: Cerakote Mil Spec + 
Made in the USA!

​SUREFIRE M300C WEAPON LIGHT: $299.00

$2140.00  MSRP

​MAGPUL: Flip up back up iron sights:   $90.00ph here.

​TIER 1 OPTICS AND ACCESSORIES

More equipment to come....stand by!

T​$1902.00  msrp

MK18 (MIL SPEC +®)----exact SAME AS THE mk18 BUT A pistol VARIANT NO TAX STAMP REQUIRED!

Use what “THEY” use.  The Daniel Defense MK18 features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3” Cold Hammer Forged Barrel.  The MK18 rail system features the Bolt-Up System has been rigorously tested prior to fielding by USSOCOM (currently over 15,000 units).  The 10.3” barrel is the same length in use for the MK18 upper most commonly used for CQB operations.  The MK18 Factory SBR by Daniel Defense is unmatched in size, weight, and performance.  Introduced in 2014, the MK18 is one of 4 models that is finished with the new Mil Spec + Cerakote.  This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

MATERIALS & CONSTRUCTION

LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 10.3″ Government Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine length, Direct Impingement
MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
BOLT CARRIER GROUP: M16 Profile, MP Tested, Chrome Lined, Properly Staked Gas Key
BUFFER: H Buffer
SIGHTS: Sold Separately
HANDGUARD: Daniel Defense RIS II MK18, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized and Cerakoted Mil Spec+
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
RAIL PANELS: 3 Rail Panels made from Santoprene, heat resistant to 300° F.
FINISH: Mil Spec+ Cerakote
Made in the USA!

The M300 Mini Scout is a powerful, lightweight weapon-mounted light—powered by a single 123A lithium battery—that features a virtually indestructible LED, which generates 500 lumens of light focused by a TIR lens into a high-intensity beam with plenty of reach for close- to mid-range operations. The rugged M300 easily and securely attaches to MIL-STD-1913 Picatinny rails via its integral thumbscrew clamp and is activated by clicking its push button tailcap switch or pressing its pressure-activated tape switch, included on appropriate models. Machined from lightweight aerospace aluminum with a Mil-Spec hard anodized finish and O-ring sealed to keep out the elements, the ultra-compact M300 will withstand the rigors of combat without weighing down your weapon.

TIER 1 RIFLES.

*SRT NOTES*

This is just one variant or a DMR / SPR setup the TIER 1 Guys are using. 

There are endless options and weapons for the DMR guy.

Also note that the weapon light, switch, ATIPAL are generally mounted to the SPR as well as a bi-pod



EOTECH EXPS3-4  / G33 3X magnifier

​SPECIFICATIONS:ATACR 1-8X24 F1

Focal Plane:First
Objective outer diameter:24mm
Exit pupil diameter: 1x: 11.26mm / 8x: 3.19mm
Field of view @100 yards/100 meters ( 1x: 96.1ft / 8x: 13.1ft / 1x: 32.0m / 8x: 4.4 m
Eye relief: 95 mm/3.74 in
Internal adjustment range: e: 30 Mil - w: 30 Mil
Click value: .1 Mil-rad
Parallax adjustment:  Fixed 125 yd
Tube diameter: 34mm/1.34in
Eyepiece outer diameter: 46 mm
Overall length (inches/mm): 10.06 in/255.5 mm
Weight (ounces/grams): 21 oz/595 g
Mounting length (inches/mm): 5.67 in/144 mm
PTL (Power Throw Lever) Standard
Reticles available: FC-DM
Daylight visible, adjustable illumination
Elevation Feature: Capped, low-profile

MAGPUL PMAG GEN 3 30 rd magazine:  $18.00 eachgraph here.

The EOTECH EXPS3-4 red dot holographic sight offers true 2-eyes-open shooting and a 7mm raised base that still allows for iron sight access. It features easy-to-adjust side buttons and an adjustable, locking, quick-detach lever for easy attachment and removal.  Rapid target acquisition at close range for CQB is a understatement, operator is able to engage targets easily to 100 meters with the EXPS3-4.  It is also the optic of choice for the technologically advanced modern rifle hunter. Its night vision-compatibility makes it a versatile choice for day or night hunting.


Paired with the EOTECH G33 STS the operator is able to engage at longer ranges due to the 3X's magnification. The new EOTECH G33.STS magnifier is shorter and lighter than previous models. The improved mount provides faster transitioning from 3X to 1X.   The G33 offers tool free azimuth adjustment, a larger field-of-view and an adjustable diopter for improved, precise focusing.

​​ STRATEGIC RESPONSE TACTICAL  LLC